| Unit 5010 |
Planning a Project |
| Topic: 5011 |
Sketching/Drawing,
Bill of Materials |
| Topic: 5012 |
Using a CAD
- Computer Aided Drawing |
| Topic: 5013 |
Safe Use of Power
Tools |
| Topic: 5014 |
Safe Use of Hand
Tools |
| |
|
| Unit 5020 |
Measures and Calibration |
| Topic: 5021 |
Measure Distances,
Calculation of Area and Volume |
| Topic: 5022 |
Use of a Ground Position
System (GPS) |
| Topic: 5023 |
Land Surveys, Topographical
Maps, Aerial Photographs |
| |
|
| Unit 5030 |
Machinery |
| Topic: 5031 |
Safe Operation and
Use |
| Topic: 5032 |
Instruments and
Controls |
| Topic: 5033 |
Maintenance and
Safety Checks |
| Topic: 5034 |
Starting and Stopping |
| Topic: 5035 |
Hitches, PTO and
Hydraulics |
| Topic: 5036 |
Tractor Safety on
the Farm Road, and Machinery Safety |
| |
|
| Unit 5040 |
Small Engines |
| Topic: 5041 |
Engine Operation
and Maintenance |
| Topic: 5042 |
Engine Adjustment
and Repair |
| Topic: 5043 |
Mower Safety and Maintenance |
| |
|
| Unit 5050/5060 |
Electricity |
| Topic: 5051 |
Electrical
Principals & Safety |
| Topic: 5052 |
Tools and Materials |
| Topic: 5053 |
Circuits and
Codes |
| Topic: 5054 |
Switches |
| Topic: 5055 |
Electrical Meters |
| Topic: 5056 |
Energy Rate and
Meters |
| Topic: 5057 |
Series and Parallel
Circuits |
| Topic: 5058 |
Overhead and
Underground Safety |
| Topic: 5059 |
Fuses, Circuits,
and Electrical Panels |
| Topic: 5060 |
120/240 Volt,
Three Wire Elelctrical System |
| Topic: 5061 |
Neutral
to Earth Voltage |
| Topic: 5062 |
Electric Motor
Type, Enclosure and Characteristics, and Connections |
| Topic: 5063 |
Installing and
Maintaining, Reversing, and Control of an Electric Motor |
| |
|
| Unit 5070 |
Drainage and Irrigation |
| Topic: 5071 |
Drainage |
| Topic: 5072 |
Irrigation |
| |
|
| Unit 5080 |
Welding and Cutting |
| Topic: 5081 |
Metals and Their Properties
and Weldability |
| Topic: 5082 |
Shielded Arc: Equipment |
| Topic: 5083 |
Shielded Arc: The
Welding Process and Safety |
| Topic: 5084 |
Shielded Arc: MIG Wire
Welding |
| Topic: 5085 |
Oxyacetylene - Equipment,
Safety, and Set up of the Torch |
| Topic: 5086 |
Oxyacetylene - Welding
and Brazing |
| Topic: 5087 |
Oxyacetylene - Cutting
Process |
| |
|
| Unit 5090 |
Structural Maintenance and Repair |
| Topic: 5091 |
Plumbing |
| Topic: 5092 |
Concrete and Masonry
|